TTVR Hydrualic Concentric Slave Mounts & Spacers

Ford IB5 Gearbox Slave Cylinder & Mount

These gearboxes are very tight for space so we have designed flywheel and clutch kits to fit with our slave and mount.

This is the only solution if you run a quaife gearkit with a larger 1″x23T input shaft.

Slave cylinders are push type only and for use with motorsport flywheels and clutches.

They will not fit with standard flywheel and clutch heights.

Our Slave cylinders are exceptionally high quality using a robust seal system and high quality bearings.

Slave Cylinder Technical Data Link

7062 – Ford Toploader Gearbox Hydraulic Slave Cylinder Mount

Can be supplied on its own or with our Hydraulic cylinder

Machined from Billet Aluminium

Slave cylinder mounting spacers are also available

For our Hydraulic Slave Cylinder Data Sheet Click Here

5723csm – Ferrari 308 Hydraulic Slave Cylinder Conversion

Aluminium mount for gearbox.

Spacers can be supplied as required, 3.5mm 5.5mm 7.5mm

Slave cylinder travel 15mm or 18mm with bearing to suit your chosen clutch type.

Slave cylinders are push type only.

Slave Cylinder Technical Data Link

TTVR BMW 5 Speed Hydraulic Concentric Slave Mount

5 Speed ZF gearbox from 2.5 2.8 3.0 etc

This mount is designed to be used with our

1092 M50 M52 M54 S50 S52 S54 184mm lightweight flywheel and our 2801 twin plate 184mm compact race clutch and TTVR Hydraulic Slave Cylinder.

The mount replaces the release bearing guide tube – BMW Part No: 23117543290

• 3′ E36   (11/1989 — 09/1999)
• 3′ E46   (04/1997 — 12/2018)
• 5′ E34   (01/1989 — 06/1996)
• 5′ E39   (02/1995 — 12/2003)
• 7′ E32   (03/1991 — 04/1994)
• 7′ E38   (07/1993 — 07/2001)
• Z3 E36    (04/1996 — 06/2002)

6246 – TTVR Ford Type 9 Concentric Slave Mount

For Ford Type 9 Gearbox

6247 – TTVR Hydraulic Concentric Slave Spacer 25mm

Aluminium spacer 25mm long.